Filter

UniFi 6 Access Point WiFi 6 Pro (U6-Pro)

KSh 28,000.00

Order via Whatsapp (Faster)

Category: Access Points

Description

UniFi 6 Access Point WiFi 6 Pro (U6-Pro)

Indoor, dual-band WiFi 6 access point that can support over 300 clients with its 5.3 Gbps aggregate throughput rate.
Dual-band WiFi 6 (802.11ax)
5 GHz (4×4 MU-MIMO) band with a 4.8 Gbps throughput rate
2.4 GHz (2×2 MIMO) band with a 573.5 Mbps throughput rate
Operates at full 4×4 MIMO with 160 MHz bandwidth
300+ concurrent client capacity
Guest Traffic Isolation, which enhances wireless network security and lowers traffic congestion

The Access Point WiFi 6 Pro (U6 Pro) is a high-performance, dual-band WiFi 6 access point ideal for home and office use.

The U6 Pro is capable of reaching an aggregate throughput rate up to 5.3 Gbps with its 5 GHz (4×4 MIMO) and 2.4 GHz (2×2 MIMO) bands, which allows it to support over 300 concurrently connected clients while maintaining an even, reliable wireless experience across your entire network.

It can also isolate your guest traffic to ensure optimal security and speed. The U6 Pro also operates at full 4×4 MIMO

Indoor, dual-band WiFi 6 access point that can support over 300 clients with its 5.3 Gbps aggregate throughput rate.

The Access Point WiFi 6 Pro (U6 Pro) is a high-performance, dual-band WiFi 6 access point ideal for home and office use. The U6 Pro is capable of reaching an aggregate throughput rate of up to 5.3 Gbps with its 5 GHz (4×4 MIMO) and 2.4 GHz (2×2 MIMO) bands, which allows it to support over 300 concurrently connected clients while maintaining an even, reliable wireless experience across your entire network. It can also isolate your guest traffic to ensure optimal security and speed. The U6 Pro also operates at full 4×4 MIMO with 160 MHz channels to create high-capacity wireless uplinks and facilitate faster data transfer. It can be set up in minutes and fully managed with the UniFi Network application.

Features:

Dual-band WiFi 6 (802.11ax)
5 GHz (4×4 MU-MIMO and OFDMA) band with a 4.8 Gbps throughput rate
2.4 GHz (2×2 MU-MIMO and OFDMA) band with a 573.5 Mbps throughput rate
Operates at full 4×4 MIMO with 160 MHz bandwidth
300+ concurrent client capacity
Guest Traffic Isolation, which enhances wireless network security and lowers traffic congestion
Included universal mounting plate, backing plate, and screw kit

Specification:

MECHANICAL
Dimensions	Ø197 x 35 mm (Ø7.76 x 1.38″)
Weight	Without mount: 460 g (1.01 lb) With mount: 600 g (1.32 lb)
Enclosure material	Plastic
Mounting material	SGCC steel
Weatherproofing	IP54
HARDWARE
Management interfaces	Ethernet Bluetooth
Networking interface	(1) GbE RJ45 port
Button	Factory reset
LED*	White/blue *Due to chip supply shortages, the U6 AP’s LED has been limited to only white and blue color modes.
Power method	802.3at PoE+
Power supply	UniFi PoE switch 48V, 0.5A PoE adapter (not included)
Supported voltage range	44 to 57VDC
Max. power consumption	13W
Max. TX power 2.4 GHz 5 GHz	22 dBm 26 dBm
MIMO 2.4 GHz 5 GHz	2 x 2 (UL MU-MIMO) 4 x 4 (DL/UL MU-MIMO)
Throughput rate 2.4 GHz 5 GHz	573.5 Mbps 4.8 Gbps
Antenna gain 2.4 GHz 5 GHz	4 dBi 6 dBi
Mounting	Wall/ceiling (included)
Operating temperature	-30 to 60° C (-22 to 140° F)
Operating humidity	5 – 95% non-condensing
Certifications	CE, FCC, IC
SOFTWARE
WiFi standards	802.11a/b/g WiFi 4/WiFi 5/WiFi 6
Wireless security	WPA-PSK, WPA-Enterprise (WPA/WPA2/WPA3)
BSSID	8 per radio
VLAN	802.1Q
Advanced QoS	Per-user rate limiting
Guest traffic isolation	Supported
Concurrent clients	300+
Zero wait DFS	Yes* *Supported with upcoming firmware versions
SUPPORTED DATA RATES
802.11a	6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11b	1, 2, 5.5, 11 Mbps
802.11g	6, 9, 12, 18, 24, 36, 48, 54 Mbps
802.11n (WiFi 4)	6.5 Mbps to 600 Mbps (MCS0 – MCS31, HT 20/40)
802.11ac (WiFi 5)	6.5 Mbps to 3.4 Gbps (MCS0 – MCS9 NSS1/2/3/4, VHT 20/40/80/160)
802.11ax (WiFi 6)	7.3 Mbps to 4.8 Gbps (MCS0 – MCS11 NSS1/2/3/4, HE 20/40/80/160)